Dremel trio tool kit with accessories

Thanks to its unique degree cutting technology and plunge-cut ability, the Trio creates quick and controlled cuts in a wide range of materials, and its ergonomic pivoting handle improves accuracy and increases comfort.

Plus, the Dremel Trio Tool Kit contains attachments for tackling a variety of home improvement projects. Two-year limited warranty degree cutting allows clean plunge cuts in any direction. View larger. Operates at speeds from 10, to 20, rpm for optimum control. And high-speed spiral cutting results in smoother edges that require less sanding—meaning less work for you. In addition, the Trio operates at speeds from 10, to 20, rpm, so you can set the correct speed for the job and get improved control and precision.

A lock-on button allows convenient, continuous operation without holding down the trigger. Follow the instructions provided in the whole-house humidifier kit. Step Three: Follow the kit-provided instructions to install the humidifier. Try the TR Dust Extraction Attachment to keep your work space clean while sanding and run your tool at medium to low speed as you sand less-than-perfect spots. Run the Trio at a high speed and push the router bit gently to avoid diminishing its usable life and damaging your work piece.

Take a few passes removing only a portion of the total amount of material you want to remove at one time. Start with the grit sanding paper and finish with grit sanding paper for a smooth finish.

Set the tool to a medium speed when sanding. A little preparation before winter weather rolls in can keep your utility costs low as you turn the heat up. Replacing old window glazing is a simple way to reduce drafts that can increase heating costs.

Step One: To remove old glazing, begin by lining the window panes with masking tape. This will reduce the risk of scratching the window frame. Set the tool at a low speed and insert the blade in between the muntin or sash and the glazing. Caution: Wear eye protection. When all glazing is removed, wipe the area with rubbing alcohol to remove any remaining residue and remove the tape. Step Two: To re-glaze, line the seam with fresh tape. Sound pressure.

Sound power. Included Accessories 9. The Dremel TRIO Sanding Mandrel for rough shaping and smoothing wood and fibreglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replaceable.

Decidated accessory for use with Dremel Trio only. Sanding bands are easily replacable. Carbide bits last longer than traditional HSS bits. Show More. Dremel Trio. Compact Foot. Vacuum Cleaner Attachment.