Viper command start user manual

When the batteries are low on the 2-way remote it emits two groups of beeps, the battery icon flashes and low battery is indicated, the alarm then emits an additional chirp upon disarming of the alarm to let you know its time to change the battery.

When the battery is low on the 1-way remote, the remote responds the same way audibly. Ask your authorized dealer if you have any questions. Slide the door up to expose the battery beneath the holder. Remove the expired battery. Place the new battery into the remote control. When power is returned the remote control is ready for use. You can operate the 2-way remote control system for two cars, with full command capability for both vehicles. Change car: While in this mode press the button to switch between cars and the or icon changes accordingly indicating which car the remote currently operates.

Select the car you want to operate and then press any command to operate the system. The selected car remains selected until the setting is changed. To change from one car to the other press the button again. When using the remote to control the system, the amber light will flash in a sequence of 1 or 2 flashes indicating the current vehicle selected.

Note: If the keypad is locked, first press and then press to exit. Note: Pressing more than one button simultaneously generates an Error tone.

Please note the screen shot to the right of a feature indicates what the display looks like when this feature is activated.

Feedback : Lock Icon will appear, and one beep from remote. If the power door locks have been connected, the doors will lock. The system will automatically check for errors when it arms.

If no arm confirmation is received, the remote will give the Out-Of-Range signal. This allows the system to continue to protect your vehicle using the remaining trigger zones.

The Status LED indicator in the vehicle will blink in a pattern to indicate the active zone number error which was found See Table of Zones. The door locks if connected will unlock and the parking lights will flash. Note: For additional chirps when disarming the system refer to the diagnostics section of this guide. Remote Start. Feedback : Remote Start Icon appears on screen. Before using the remote start be sure the vehicle is parked in a safe area with proper ventilation.

The preset remote start run time is 12 minutes. This can be changed to between 12 and 60 minutes. The system has a feature, if programmed On , that automatically notifies you when the runtime is running low. When the system reaches 3. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions.

Enter a new password. Viper User Manual Download for 1. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesirable operation.

Remove the dashboard panels around your ignition switch to find the system. The viper alarm system has several features, including the ability to passively or actively arm your vehicle. Default 2 button press reset and deletion feature 3 4. This will disarm the system on some models. How to reset viper remote start.

Depending on the age of your remote start system, there are a few ways that the remote start can be programmed to detect when the engine has successfully started so it can stop cranking the starter.

Remote starters have become popular accessories on cars and trucks around the world. Thanks to their advanced technology.

You can set or reset the remotes to your engine in. Turn on the valet button. It can be viper hv, viper plus, viper v, or viper xv, but the fact is you can still reset or program it using any of the solutions above. If you do this, your viper alarm remote will not be reset; The foot brake wire on a viper remote start system is the solid brown wire.

If the vehicle starts in gear, cease remote start operation immediately and consult with the authorized directed dealer to fix the problem. You have remained in right site to start getting this info. The vehicle serviced, the remote start system must be disabled using the installed toggle switch. After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the safety You can add a viper smartstart module to any compatible viper remote start or security with remote start system to make your system smartstart ready.

Viper remote start user guide this is likewise one of the factors by obtaining the soft documents of this viper remote start user guide by online. Acquire the viper remote start user guide join that we allow here and check out the link. You might not require more grow old to spend to go to the ebook opening as capably as search for them. Viper remote start user guide recognizing the way ways to acquire this books viper remote start user guide is additionally useful.

Thank you for purchasing this viper remote transmitter. The remote start module must be removed Get the viper remote start user guide connect that we allow here and check out the link. You have remained in right site to begin getting this info. By adding a vsm module, your system will also be ready for smartstart gps. It is not as resilient as say a smart phone. Fortunately I realized the downside quickly and purchased a universal screen protector and cut it down to size to cover the LCD portion before I had any real blemishes.

Personally I think Viper should improve the screen quality on such an expensive item, it's the only thing holding me back from 5 stars. Otherwise the remote and system are a pretty incredible upgrade to any vehicle. The system is okay. The distance is huge!! I have the 2 way led remote. Change some future on the remote is difficult and confusing, so easy to press the bottom in wrong time!! The dealer didn't offer the smart start, now I have to buy an other part to use it with my i-phone.

An other day and appointment for the install. Otherwise it is really good and I like it! Installed this on my Nissan. I probably had to connect 25 different wires to get everything working but I am quite satisfied! Remote start also helps prolong the life of your engine by allowing it to warm up before you drive. Don't trust a mechanic to install this alarm for you!

Every car is different and I needed the full service manual for mine to locate every wire. Newer cars might be easier though. Excellent product, had the Viper installed on my 5 speed mazda 3, lots of safety features built in for manual transmissions, installed by future shop who did an excellent job on installation and explaining on how the system works, much better product and features than previous remote starters that Ive had over the years, no complaints at all with this great product from Viper, keep up the good work Viper.

Love the system I have had one every since they first came out. The range is wonderful and I really love the paging feature. The only thing that i don't like is they now put the shock sensor in the brain of the alarm causing the sensitivity to suffer.

I had to purchase an additional shock sensor any order to have good sensitivity. I really like this system. I think that it is a little over priced. If you don't need the range then go with a cheaper one.

What little trouble I have had with this system has been because of the retailer i purchased it from. Overall only purchase this one if you NEED the range. I Purchased one of these remote start about 5 months ago just before winter.

Was a very extensive install, better install manual would have been nice. But it was worth it. It is the best remote starter I have ever had.